Rigol  |  SKU: DP2031

Rigol DP2031

€1.099,00
Tax included Shipping calculated at checkout.

The DP2000 series identifies a high-precision programmable linear power supply. In addition to basic functions such as low ripple and noise, fast transient response time, etc., it features three fully isolated channels, high accuracy and high sampling rate. The resolution of the minimum current measurement reaches 1μA and the annual accuracy is 28μA. It has color touch screen display, a variety of standard configuration interfaces, a variety of built-in test requirements.

Description
Model DP2031
Max Power 222 Watts
Number of Channels 3
Rear Output Terminals Yes, for Channel 1 / Channel2
Voltage / Current per Channel CH1: 32V/3A
CH2: 32V/3A
CH3: 6V/5A (Opt. 10A)
ARB Generation Yes, min dwell time of 1 msec.
Aanalysis Real-Time Plot, Trend,Current Pulse Analysis and Datalogging
Command Processing Time 10msec.
Read-Back Resolution Current 0.1 mA (Channel 1/2)
1 mA (Channel 2)
Read-Back Resolution Voltage 1mV
Interfaces USB,RS232,LAN,Digital IO, GPIB (Optional)

 

________________________________________________________________________________________

Note[1]: The CH3 of DP2031 has two ranges: 6 V/5 A and 6 V/10 A (optional). When it switches to 6
V/10 A, both CH1 and CH2 switch to 32 V/2 A from 32 V/3 A.
Note[2]: The GPIB and RS232 share the same port. The optional GPIB interface can be installed in place of the RS232 interface.

 

Features

DP2031: 32 V/3 A || 32 V/3 A || 6 V/5 A (10 A)
- 3 electrically isolated independent channels with a maximum total power of 222 W
- 4.3-inch LCD color touch screen
- Internal series/parallel connections for CH1 and CH2
- High resolution for measurement of 1 μA low range current
- Capability to measure and display wide dynamic ranges of current
- Excellent programming/readback accuracy
- Transient response time <50 μs
- Front and rear output terminals
- 2-wire or 4-wire remote sense
- A maximum of 512 arbitrary points with dwell time down to 1 ms; various built-in basic
waveforms
- Low output ripple and noise <350 μVrms/2 mVpp
- Command processing time <10 ms
- Automatic switchover between low and high range measurement
- Timing output, energy consumption analysis (IoT), data logging and analysis
- Capability to measure the minimum of 1 ms pulse current
- Three rack-units (3U), 1/2-rack form factor
- Software control
- Over voltage, over current, and over temperature protection
- Various interfaces available: USB HOST, LAN, Digital I/O, and RS232 standard; GPIB optional

Manuals

DP2000_datasheet

DP2000_programming_manual

DP2000_user_manual
DP2000 quick guide